CoM.sat PCI-GSM-Board Manuel d'utilisateur télécharger pdf (Page 8)

User Manual coM.sat PCI GSM

Created on: 18.01.2010 Page | 7

Please observe security references as per DIN 34! User manual PCI-GSM V1.1

5. ... until about 1,5 mm of the con-

tacts can still be seen.

6. Insert the board back into the PCI slot and fix it with the screws. Close the

case and re-plug the network cable.

4. Getting the PCI Board into operation

To start operation of the coM.sat PCI GSM Board first you will have to insert the

SIM-cards and connect the antenna.

1. With a pen or a small screwdriver

press onto the yellow button to

eject the SIM-cardholder.

2. After ejection of the cardholder,

insert the SIM-cards.

Remark:

The SIM-cards do only fit into the cardholer in one singular

position!

3. Replace the cardholder with the cards into its case. The SIM-cards have to

be face down when doing this. Make sure the cardholder is correctly posi-

tioned within its track.

4. Connect the antenna(s) to the an-

tenna connection (s) by initially

docking in the antenna and then

screwing it into a fixed position. A

screw driver will not be necessary

for this procedure.

1 2 3 4 5 6 7 8 9

Pas de commentaire

CoM.sat PCI-GSM-Board Manuel d'utilisateur Page 8